Systor 1:5 M.2 NVMe PCIe SATA SSD Duplicator/Sanitizer 9GB/Min Copier/Eraser

Description

Our M.2 PCIe NVMe duplicators are completely standalone units that can clone or sanitize a number of different media types in a single touch of a button. These high-speed, high-performance SSD copiers are the perfect solution for business, education, and government entities (military, law enforcement, etc.) where copying and erasing device data needs to be accomplished with precision and minimal time.
* Duplication speed will vary depending on read/write transfer rates of master (source) and target (blank) hard drives.
FLEXIBLE CROSS INTERFACE DUPLICATION
Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
NGFF SATA M.2 SSD
NVME PCIe M.2 SSD
AHCI
NVME SIZE COMPATIBILITY
Compatible with all sizes of:
NVME M.2 SSD (Types 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110, 3080)
PCIe SSD (full and low profiles)
INTELLIGENT DUPLICATION (COPY MODES)
System and Files (Quick Copy Mode)
Copies only the data area and skips empty space, reducing the copy duration time.
All Partitions
Can be set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
Whole Media
Copies from the initial sector to the end, bit-by-bit. There are no format limitations in this mode. Supports all systems and proprietary formats, along with various brands.
Percentage Copy
Set a selected percentage of source/master capacity to copy.
SANITIZATION METHODS (ERASE MODES)
Quick Erase
Erases the device's index table, and only takes
a few seconds
to complete.
Full Erase
Erases the entire device.
DoD Erase
Complies with the erasure standards of the U.S. Department of Defense (DoD) 5220.22-M.
Secure Erase
Complies with standards of the National Institute of Standards and Technology (NIST) 800-88.
COMPARE FUNCTION + CRC CHECKSUM
Performs bit-by-bit cyclic redundancy check (CRC) to ensure copies are identical for every duplication session.
SPECIFICATIONS
PRODUCT FEATURES
Features
Descriptions
Operation Type
Stand-alone, FPGA-based design (no PC required)
Controller Design
Embedded controller is designed to support capacities over 18TB+.
Constant improvement supports latest market-available devices.
Devices Supported
Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
NGFF SATA M.2 SSD
NVME PCIe M.2 SSD
AHCI
Hot Swap Supported
Supports hot swapping of devices.
Bandwidth Performance
Peak transfer speeds up to 9GB/min. (150MB/sec.)
Actual performance is dependent on media transfer speeds.
Dedicated bandwidth enables high-volume replications without speed degradation.
Read-Only Or Eraseable Source Port
Built-in feature. Enables/disables source media to be erased/sanitized during erase process.
Modular Port Design
Replace ports easily to reduce downtime and for cost-effective long-term usage.
PRODUCT FUNCTIONS
Features
Descriptions
Copy Modes
System and Files
(Quick Copy Mode):
Copies data and skips empty space. Only supports Windows, Mac, and Linux.
All Partitions
:
Set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
Whole Media
:
Copies from the initial sector to the end, bit-by-bit. No format limitations. Supports all systems and proprietary formats, along with various brands.
Percentage Copy
:
Set a selected percentage of source/master capacity to copy.
Compare (Verification)
Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors and ensure accuracy of copied data from source device to target device(s).
Sanitization Modes
Quick Erase
:
Erases device index table.
Full Erase
:
Erases entire device(s), in compliance with the NIST 800-88 standard.
DoD Erase
:
Erases entire device(s), in compliance with the DoD 5220.22-M standard.
DoD EraseComp
:
Erases entire device(s) and verifies complete erasure, in compliance with the DoD 5220.22-M standard.
Secure Erase
:
Erases non-loadable areas, in compliance with the NIST 800-88 standard.
Skip Bad Sectors
Set number of bad sectors to skip during Copy/Compare/Erase.
PRODUCT COMPATIBILITIES
Compatibilities
Descriptions
Compatible Devices
NGFF (M.2): 2230, 2242, 2260, 2280, 3030, 3042, 3060, and 3080.
Supports B+M Key or M Key only
Supported Formats
Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
Whole Device Copy Function: All Formats, including proprietary formats.
GPT, MBR, and Advanced Formats.
Supported O/S
All (Windows, Mac, Linux, and other proprietary systems).
PRODUCT SPECIFICATIONS
Specifications
Descriptions
LCD Display
2 x 20 Backlit Monochrome LCD Display
LEDs
3 LED Indicators per Port:
Yellow (Power), Green (Pass), and Red (Fail)
Control Panel
4 Push Buttons (▲, ▼, OK, ESC)
Power Requirements
Power Input: Universal Power 115VAC or 230VAC, 50/60Hz
Operational Temperature
5°C ~ 45°C (41°F ~ 113°F)
Non-operational Temperature
-20°C ~85°C (-4°F ~ 185°F)
Humidity
Operating: 20% ~ 80%, non-condensing
Non-operating: 5% ~ 95%, non-condensing
Packaging Dimensions (L×W×H)
16.5 in. x 14.5 in. x 12.5 in.
Product Weight
22.1 lbs.
Certifications
FCC, CE, RoHS, and REACH
MIL-STD-810G
501.5 / 502.5 / 507.5 / 514.6 / 516.6
ISO/IEC
27037, 27041, 27042, 27043, and 27050
* Specifications are subject to change without notice.
Important Notice
All duplicators are brand new (unless otherwise stated). All brand new duplicators come standard with 3 year labor and 1 year parts warranty with lifetime technical support.
All DVD duplicators
DO NOT
burn copy copy-protected DVD and CD discs, such as movies rented from DVD rental stores.
Buyer must agree to our return policy
BEFORE
purchase. Please read carefully and inquire with questions before bidding/buying.
Any questions or concerns can be addressed by eBay message.
Store Policy
Usual processing time after receiving customer order is 1 business day. Most orders placed on normal business days ship out that same business day, if not, the very next business day.
Free shipping
only
applies to orders shipped within the continental United States. Additional shipping fees will be required for orders sent to Hawaii, Alaska, military (APO/FPO) addresses and US territories (i.e. Puerto Rico, US Virgin Islands, etc.). Please contact us by eBay message for shipping costs to these locations.
Shipping and payment terms differ for international buyers. Please contact us by eBay message for shipping cost and terms of payment.
Please note that international shipments do not include import duties, taxes, destination fees or unknown shipper security fees.
Returns & Warranty
Returns for refunds and exchanges are accepted within 30 calendar days from the invoice date.
No returns will be accepted without an RMA (Return Merchandise Authorization) number.  To receive an RMA number, please contact us by eBay message.
Non-defective returns will be subject to a restocking fee of up to 30% from item purchase price, excluding any shipping and handles charges.
Shipping and handling charges for returns are non-refundable.
For further information regarding returns, please check out
our detailed return policy page
.
For warranty information regarding products, please check out
our warranty page
.
© Copyrights 2022 SySTOR. All Rights Reserved.