-40%

Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit

$ 19.53

Availability: 37 in stock
  • Brand: Smooth-On
  • MPN: 43219-75528
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back
  • UPC: Does not apply
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Condition: New

    Description

    Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit
    Epoxy Coating for 3D Printed Objects
    Smooths 3D Printed Objects
    Compatible with SLA and SLS prints.
    It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
    XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self- levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use – 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D® does not contain VOC’s, phthalates or phosphates. Adult Supervision Required. Keep Out of the Reach of Children.