-40%
Headlights For 2007-2013 GMC Sierra 1500 2500HD 3500HD BLACK Headlamps 07-13 US
$ 54.36
- Description
- Size Guide
Description
For 2007-2013 GMC Sierra 1500 2500HD 3500HD Headlights Headlamps PairItem Description:
APPLICATION:
For 2007-2013 GMC Sierra 1500
For 2007-2014 GMC Sierra 2500 HD(Don't compatible with 2500 HD classic)
For 2007-2014 GMC Sierra 3500 HD
Vehicle Compatibility Reference Number：20980241, 20980242, 22853030, 22853029, GM2502283, GM2503283
FEATURE:
High Beam: 9005/HB3(Bulbs Not Includes)
Low Beam: H11(Bulbs Not Includes)
Turn Signal Light: 3157A(Bulbs Not Includes)
Black Housing Clear Lens With Amber Reflector
SAE/DOT approved for street legal
High grade ABS plastic: for toughness, impact resistance, and heat resistance.
Plug-n-play installation: fully compatible as replacement for factory parts.
High Quality: Fully sealed, waterproof, dust and corrosion resistant, works perfectly even in harsh weather conditions.
PACKAGE INCLUDES:
1 Pair LH (Driver Side) + RH (Passenger Side) Headlights
INSTALLATION GUIDE:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to
25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than
3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in
front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and
counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light
beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment
correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your results.
More Display:
On Apr-20-21 at 23:45:10 PDT, seller added the following information:
