-40%
for 2007 2008 2009 Toyota Camry Black Projector Headlights Headlamp Assembly L+R
$ 51.22
- Description
- Size Guide
Description
DescriptionA cool headlights gives your truck great looking style and performs at a first class level. Our headlights is designed to fit your exact make & model. Step up from the ordinary, it's time replace your factory headlights today!
Feature
*High quality generic branded lights that are indentical to OEM lights. Safety and Durable.
*DOT/SAT approved for street legal. Safety & Fashion.
*High grade ABS plastic. For toughness, impact resistance, and heat resistance.
*
Adjustment screws for high/low beam.
*Projector design, amber reflector.
Low Beam Bulb Type: H11 (bulb not included)
High Beam Bulb Type: 9005 HB3 (bulb not included)
To fit for models:
2007-2009 Toyota Camry
Vehicle Compatibility Reference Number:
8113033652,8113033662, 8111006B90, 8111006C00
Packing list:
1 Pair of Headlights (Driver & Passenger Side)
Please Note:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws.
Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually.
The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field.
The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field.
The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your result.