for 2005 2006 Toyota Tundra 05-07 Sequoia Chrome Headlights Headlamps Left+Right

Description

Document
A cool headlights gives your truck great looking style and performs at a first class level. Our headlights is designed to fit your exact make & model. Step up from the ordinary, it's time replace your factory headlights today!
Feature
*High quality generic branded lights that are indentical to OEM lights. Safety and Durable.
*DOT/SAT approved for street legal. Safety & Fashion.
*High grade ABS plastic. For toughness, impact resistance, and heat resistance.
*Condition: 100% Brand New and High Quality
*Material: ABS Plastic Housing / Polycarbonate Lens
*Color: Chrome Housing + Clear Lens
*
Low Beam /
High
Beam Bulb Type: H4 Bulb (Not Included)
*Turn Signal Light Bulb Type: 3157A Bulb (Not Included)
Fitment
fits for 2005-2006 Toyota Tundra
(Double Cab / Crew Cab 4 Door Only)
fits for 2005-2007 Toyota Sequoia
Attention Note:
Will Not Fit Toyota Tundra Regular ( Standard ) Models With 2 Full Size Front Doors Only
Will Not Fit Toyota Tundra Access ( Extended ) Cab Models With 2 Full Size Front Doors & Half Size Backward Doors
Vehicle Compatibility Reference Number： #:
TO2502158,TO2503158, 811500C031, 811100C031
Packing list
1 Pair of Headlights (Driver & Passenger Side)
Please Note
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. 【Find the adjustment screws】
Firstly, locate the adjustment screws on your vehicle.
2. 【Adjust the headlights individually】
The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. 【Adjust the vertical field】
The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. 【Adjust the horizontal field】
The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. 【Test your results】