For 2003 2004 2005 2006 Ford Expedition Headlights 03 04 05 06 Replacement Lamp

Description

Description:
High Beam Type:  9005/HB3
(bulb included)
Low Beam Type: 9006/HB4
(bulb included)
Turn Signal Light Type: 3157
SAE/DOT approved for street legal
Only the hi/lo Beam bulbs are
included
,
the other bulbs are
NOT included and you need to reuse original ones.
Made By OEM Approved & ISO Certified Manufacturers With Materials That Meets OEM Requirements
Chrome Housing Clear Lens Amber Reflector
Application:
For 2003-2006 Ford Expedition
Package Includes:
2pcs, Left Driver Side & Right Passenger Side Headlights
For 2003-2006 Ford Expedition
Note:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet
from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above
the ground.
1.
【
FIND THE ADJUSTMENT SCREWS
】
Firstly, locate the adjustment screws on your vehicle.
2.
【
ADJUST THE HEADLIGHTS INDIVIDUALLY
】
The headlights should be adjusted one at a time. Put a rag or towel
over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3.
【
ADJUST THE VERTICAL FIELD
】
Adjust the vertical field. The screw on the top of the light housing should be turned
clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the
most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4.
【
ADJUST THE HORIZONTAL FIELD
】
The screw on the side of the light housing should be turned to get the right/left
adjustment
correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5.
【
TEST YOUR RESULTS
】